Murano AWD V6-3.5L (VQ35) (2003)
^
Trim off 2 to 3 mm from "Surface B" (see Figure 9).
CAUTION:
^
Do NOT trim "Surface A".
^
Do NOT trim more than 3 mm from "Surface B".
9.
Re-install the:
^
Small Slide Plates (in the finisher)
^
Lower Plastic Slide Finisher
^
A/T Console Finisher (re-connect vehicle wire harness)
^
Coin Trays
^
Lower Knob Cover
^
A/T Select Lever knob and Lock Pin
10.
Check to make sure the click noise is gone.
11.
Check for proper A/T Shifter operation:
^
Move shifter from Park ("P") position to Low ("L") position
^
Move shifter from Low ("L") position to Park ("P") position