Murano AWD V6-3.5L (VQ35) (2003)
![background image](/nissan/murano_awd/v6-3.5l_(vq35)/Page-2034001.png)
Wheel Bearing: Testing and Inspection
Rear
REAR WHEEL HUB
On-Vehicle Inspection and Service
Make sure the mounting conditions (looseness, back lash) of each component and component status (wear, damage) are normal.
WHEEL BEARING INSPECTION
^
Move wheel hub in the axial direction by hand. Make sure there is no looseness of wheel bearings.
Axial end play: 0.05 mm (0.002 inch) or less
^
Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there are any irregular conditions, replace wheel hub and
bearing assembly.