Murano AWD V6-3.5L (VQ35) (2003)
10.
Torque the 17 mm CVT Manual Lever Nut to: 29.8 N-m (3 Kg-m, 22 ft-lbs). See Figure 4.
IMPORTANT:
^
Do NOT allow the CVT Manual Lever to move while tightening.
^
Use the adjustable wrench to hold the Manual Lever while tightening.
Final Steps:
11.
Re-install the Fuse/Relay Box.
^
Make sure the Fuse/Relay Box is fully seated and secured with the Locking Tabs.
12.
Re-connect the negative battery cable.
13.
Turn the ignition switch to the ON position (do not start the engine), then:
^
Press and hold the brake pedal
^
Move the CVT shift selector through all gear selections, confirming smooth and proper operation.
14.
Make sure the parking brake is applied, then:
^
Press and hold the brake pedal.
^
Start the vehicle.
^
Move the CVT shift selector through all gear selections, confirming smooth and proper operation.
15.
Re-program the radio station presets.
16.
Re-set the clock.
CLAIMS INFORMATION
Submit a "Campaign" (CM) line claim using the claims coding information shown.