Murano AWD V6-3.5L (VQ35) (2003)
Technical Service Bulletin # 04-061
Date: 040519
A/T Controls - DTC's P0725/P1722 Stored In TCM
Classification: AT04-006
Reference: NTB04-061
Date: May 19, 2004
2003 MURANO; DTC P0725 ENGINE SPEED SIGNAL AND/OR P1722 ESTM VEHICLE SPEED SIGNAL
APPLIED VEHICLES:
2003 Murano (Z50)
APPLIED VIN'S:
Equipped with AWD, built before JN8AZ08W(*)3W 225337
Equipped with 2WD, built before JN8AZ08T(*)3W 113900
APPLIED DATE:
Built before March 18, 2003.
IF YOU CONFIRM:
DTC(s) P0725 and/or P1722 is stored in the TCM,
NOTE:
These codes are not OBD-II self-diagnostic items and will not turn ON the MIL.
ACTIONS:
Step A: Confirm this bulletin applies:
^
Check the Current TCM Part Number.
^
Compare your Current TCM Part Number to Chart A.
If that part number does not match one in Chart A, this bulletin does not apply.
Go back to ASSIST for further diagnostic and repair information.
Step B: Reprogram the TCM.
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
CLAIMS INFORMATION
Service Procedure
Step A: Confirm This Bulletin Applies.
1. With CONSULT-II "ON", print the Transmission Control Module Part Number as follows:
[START (Nissan)] >> [TRANSMISSION] >> [ECU PART NUMBER] >> [COPY]