Murano AWD V6-3.5L (VQ35) (2003)
Windshield: Service and Repair
Molding
Windshield Molding
Removal and Installation
REMOVAL
Remove windshield. Refer to "Removal and Installation".
NOTE:
Apply protective tape around circumference of windshield.
-
Guiding a cutter knife along glass, cut surface of molding.
-
Using pliers, draw out all remaining molding left in flanged area of body, and remove it completely from adhering surface on glass.
INSTALLATION
Refer to "Removal and Installation".
NOTE:
-
Align matching marks on body and glass. Install glass to body.
-
Press entire surface of glass lightly to fit it completely.
Using a spatula, repair any adhesive overflow or shortage to make surface smooth. Position windshield moldings and allow their adhesion.
CAUTION:
-
Be sure to install windshield molding before adhesive hardens.
-
After installing glass, keep door windows open and avoid driving vehicle until adhesive has completely cured.