Murano AWD V6-3.5L (VQ35) (2003)
Wiper Switch: Service and Repair
Removal and Installation for Front Wiper and Washer Switch
REMOVAL
1. Remove steering column lower cover and combination meter. Refer to "Removal and Installation". See: Instrument Panel, Gauges and Warning
Indicators/Instrument Cluster / Carrier/Service and Repair
2. Disconnect wiper and washer switch connector.
3. Pull wiper and washer switch toward the passenger door while pressing pawls in direction shown by the arrow in the figure, and remove it from the
base.
INSTALLATION
Install in reverse order removal.