nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Removal And Installation|Page 6751 > < Removal and Replacement|Page 6744
Page 1
background image

Rear Door Exterior Handle: Service and Repair
Removal And Installation

With Intelligent Key System

REAR DOOR LOCK

OUTSIDE HANDLE : Removal and Installation

REMOVAL
1. Remove rear door finisher. Refer to See: Rear Door Panel/Service and Repair/Removal and Installation.
2. Fully close rear door glass.
3. Remove sealing screen. Refer to See: Rear Door Window Glass/Service and Repair/Removal and Replacement/Removal And Installation.

4. Remove door side grommet, and loosen TORX bolt from grommet hole.
5. While pulling outside handle, remove outside handle escutcheon.

6. While pulling outside handle (1), slide toward rear of vehicle to remove outside handle.
7. Remove front gasket and rear gasket.

8. While pulling outside handle bracket, slide toward rear of vehicle to remove outside handle bracket.
9. Reach in to separate outside handle cable connection on outside handle bracket.

Removal And Installation|Page 6751 > < Removal and Replacement|Page 6744