Murano AWD V6-3.5L (VQ35DE) (2009)
Trunk / Liftgate Striker: Service and Repair
Removal And Installation
With Intelligent Key System
BACK DOOR
BACK DOOR STRIKER : Removal and Installation
REMOVAL
1. Remove luggage rear plate. Refer to See: Interior Moulding / Trim/Service and Repair/Luggage Floor Trim/Removal And Installation.
2. Remove mounting bolts, and then remove back door striker.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Check back door open/close operation after installation.
-
When removing and installing back door striker, be sure to perform the fitting adjustment. Refer to See: Adjustments/With Intelligent
Key System.
Without Intelligent Key System
BACK DOOR
BACK DOOR STRIKER : Removal and Installation
REMOVAL
1. Remove luggage rear plate. Refer to See: Interior Moulding / Trim/Service and Repair/Luggage Floor Trim/Removal And Installation.
2. Remove mounting bolts, and then remove back door striker.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Check back door open/close operation after installation.
-
When removing and installing back door striker, be sure to perform the fitting adjustment. Refer to See: Adjustments/Without Intelligent
Key System.