Murano AWD V6-3.5L (VQ35DE) (2009)
Rear Door Weatherstrip: Service and Repair
Removal And Installation
DOOR PARTING SEAL
Removal and Installation
REMOVAL
DOOR PARTING SEAL
1. Fully open front door.
2. Using a remover tool (A), disengage the clips from the door parting seal (1).
CAUTION:
-
Disengage the clips slowly and carefully.
-
Do not pull the door parting seal strongly.
3. Remove front door parting seal.
REAR DOOR PARTING SEAL
1. Fully open rear door.
2. Remove rear door parting seal.
Pull back rear door parting seal (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
When installing, check visually the fillet molding and the clips, then replace them with new parts if they have been damaged.
-
When installing door parting seal, check that blind clips are securely fitted in panel holes on body, and then press them in.