nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABS/TCS - ABS/VDC Lamp ON/DTC's C1161/C1162|Page 4321 > < ABS/TCS - ABS/VDC Lamp ON/DTC's C1161/C1162|Page 4319
Page 6
background image

16. Select the "ECM Reprogram" icon (see Figure 6).

17. When you get to the reprogramming screen shown in Figure 7, confirm this bulletin applies as follows.

A. Write down the ABS Control Unit part number.

NOTE:
^

Control unit part numbers for other vehicle systems may be listed. Part numbers for other systems do not apply to this bulletin.

^

If an ABS Control Unit part number is not listed, this bulletin does not apply or it has already been completed.

^

If this column is blank (no part number listed), this bulletin does not apply. Close C-III and refer to ASIST for further diagnostic information.

^

If a Part Number is listed, write it on the Repair Order.

B. Compare the Part Number you wrote down to the number in the Current ABS Control Unit Part Number column in Table A.

ABS/TCS - ABS/VDC Lamp ON/DTC's C1161/C1162|Page 4321 > < ABS/TCS - ABS/VDC Lamp ON/DTC's C1161/C1162|Page 4319