nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Procedures|Page 4462 > < Procedures|Page 4460
Page 5
background image

Refer to  See: Diagrams/Diagram Information and Instructions for symbols not described on the above.

DISASSEMBLY

Refer to  See: Diagrams/Diagram Information and Instructions for symbols not described on the above.

Removal And Installation

REAR DISC BRAKE

BRAKE CALIPER ASSEMBLY : Removal and Installation

REMOVAL

WARNING:
Clean any dust from the brake caliper and brake pads with a vacuum dust collector. Never blow with compressed air.

CAUTION:
Never depress the brake pedal. Brake fluid may splash while removing the brake hose.
1. Remove tires with power tool.
2. Fix the disc rotor using wheel nuts.
3. Drain brake fluid. Refer to See: Hydraulic System/Brake Fluid/Service and Repair/Draining.

CAUTION:
Never spill or splash brake fluid on the disc rotor.
4. Remove union bolt (1) and copper washers then disconnect brake hose (2) from caliper assembly.
5. Remove torque member mounting bolts, and remove brake caliper assembly.

CAUTION:
Never drop brake pads and caliper assembly.
6. Remove disc rotor.

CAUTION:
-

Put matching marks on the wheel hub and bearing assembly and the disc rotor before removing the disc rotor.

-

Never drop disc rotor.

Procedures|Page 4462 > < Procedures|Page 4460