Murano AWD V6-3.5L (VQ35DE) (2009)
Technical Service Bulletin # 10-113
Date: 100927
ABS/TCS - ABS/VDC Lamp ON/DTC's C1161/C1162
Classification: BR10-009
Reference: NTB10-113
Date: September 27, 2010
2009 MURANO; ABS / VDC LIGHT ON WITH DTC C1161/C1162
APPLIED VEHICLE: 2009 Murano (Z51) with AWD only
APPLIED VINS: Vehicles built up through JN8AZ18W(*)9W 208438
APPLIED DATES: Vehicles built up through June 17, 2009
IF YOU CONFIRM:
The ABS and / or VDC warning lamp is 'ON'
AND
DTC C1161 (SIDE G SEN SET) and/or C1162 (PRESS SEN SET) is found stored in CONSULT III/ABS.
ACTION:
1. Go to SERVICE PROCEDURE to confirm this bulletin applies to the vehicle being worked on.
2. If this bulletin applies, reprogram the ABS Actuator and Electric Unit (Control Unit).
3. Erase the DTC(s) after ABS Control Unit reprogramming.
4. Perform Steering Angle Sensor Neutral Position Adjustment and DECEL G Sensor Calibration.
IMPORTANT:
The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE
PROCEDURE as it contains information that is essential to successfully completing this repair.
CLAIMS INFORMATION
Service Procedure
SERVICE PROCEDURE
IMPORTANT:
Before starting, make sure:
^ ASIST on the C-III computer has been freshly synchronized (updated).
^ All C-III software updates (if any) have been installed.