Murano AWD V6-3.5L (VQ35DE) (2009)
NOTE:
^ If "Transfer To VI" reaches 100%, and "Transfer To ECU" does not start, or
^ The Error in Figure 9A displays
A. DO NOT replace the ABS Control Unit. The ABS Control Unit is not damaged.
B. Check / make sure the battery voltage is above 12 V and all vehicle electrical loads are turned OFF (see Step 3 and 4).
C. Select Cancel Data Transmission (Figure 9), click on the "Home" icon (upper left corner of C-III screen), and then re-start from the beginning (go
to Step 1).
20. When a screen similar to Figure 10 appears, ABS Control Unit reprogramming is complete.
NOTE:
If you can't print the screen shown in Figure 10:
A. Select the Print icon.
B. Select Save.
C. Select OK.
A copy of the screen is now saved in the Toughbook(R) PC