Murano AWD V6-3.5L (VQ35DE) (2009)
-
To install, align protrusion (B) of oil pan gasket with notches
(A) of front timing chain case and rear oil seal retainer.
Arrow indicates Engine front.
-
Install oil pan gasket (1) with smaller arc to front timing chain case side.
c. Install new O-rings (2) on the bottom of cylinder block (1) and oil pump (3).
Arrow indicates Engine front.
d. Apply a continuous bead of liquid gasket with the tube presser
(commercial service tool) to the cylinder block mating surface of oil pan (upper) to a limited portion as shown in the figure.
b : 35 mm (1.38 in)
c : dia 3.5 - 4.5 mm (0.138 - 0.177 in)
Arrow indicates Engine front.
Use Genuine RTV Silicone Sealant or equivalent. Refer to See: Specifications/Fluid Type Specifications.
CAUTION: