Murano AWD V6-3.5L (VQ35DE) (2009)
/Page-472007.png)
-
Figure is shown as an example of bank 1.
-
When handling camshaft sprocket (INT), be careful of the following caution:
CAUTION:
-
Handle carefully to avoid any shock to camshaft sprocket.
-
Never disassemble. [Never loosen bolts (A) as shown in the figure].
19. Remove timing chain tensioners (secondary) from cylinder head as follows, if necessary.
-
Remove timing chain tensioners (secondary) with a stopper pin attached.
20. Use a scraper to remove all traces of old liquid gasket from front timing chain case, and opposite mating surfaces.
-
Remove old liquid gasket from bolt hole (B) and thread.
A : Remove sticking old liquid gasket
21. Use a scraper to remove all traces of old liquid gasket from water pump cover.
INSTALLATION
NOTE:
