Murano AWD V6-3.5L (VQ35DE) (2009)
4. Measure the center thickness of the removed valve lifters with a micrometer (A).
5. Use the equation below to calculate valve lifter thickness for replacement.
-
Thickness of new valve lifter can be identified by stamp marks on the reverse side (inside the cylinder).
Stamp mark 788P indicates 7.88 mm (0.3102 in) in thickness.
A : Stamp
B : Thickness of valve lifter
Available thickness of valve lifter: 27 sizes with range 7.88 to 8.40 mm (0.3102 to 0.3307 in) in steps of 0.02 mm (0.0008 in) (when manufactured at
factory). Refer to See: Camshaft, Lifters and Push Rods/Camshaft/Specifications.
6. Install selected valve lifter.
7. Install camshaft. Refer to See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Exploded View.
8. Manually turn crankshaft pulley a few turns.
9. Check that the valve clearances for cold engine are within the specifications by referring to the specified values. Refer to .
10. Install all removal parts in the reverse order of removal.
11. Warm up the engine, and check for unusual noise and vibration.