Murano AWD V6-3.5L (VQ35DE) (2009)
Without 7 Inch Display
DUCT AND GRILLE
REAR VENTILATOR DUCT 2 : Removal and Installation
REMOVAL
1. Remove the front seat assembly (left/right). Refer to See: Body and Frame/Seats/Service and Repair/Front Seat/Exploded View.
2. Remove the lower console finisher (left/right). Refer to See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Exploded
View.
3. Remove the screws (A), nuts (B), and clips (C), and then remove rear ventilator duct 2 (1).
INSTALLATION
Install in the reverse order of removal.
With 7 Inch Display