Murano AWD V6-3.5L (VQ35DE) (2009)
Passenger side
1. Remove the rear foot duct 1 (right). Refer to See: Rear Foot Duct 1/Exploded View/Without 7 Inch Display.
2. Pull up the passenger side floor carpet. Refer to See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair/Exploded View.
3. Remove the mounting clips (A), and then remove the rear foot duct 2 (right) (1).
INSTALLATION
Install in the reverse order of removal.
With 7 Inch Display
DUCT AND GRILLE
REAR FOOT DUCT 2 : Removal and Installation
REMOVAL
Driver side
1. Remove the rear foot duct 1 (left). Refer to See: Rear Foot Duct 1/Exploded View/With 7 Inch Display.
2. Pull up the driver side floor carpet. Refer to See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair/Exploded View.
3. Remove the mounting clips (A), and then remove the rear foot duct 2 (left) (1).
Passenger side
1. Remove the rear foot duct 1 (right). Refer to See: Rear Foot Duct 1/Exploded View/With 7 Inch Display.
2. Pull up the passenger side floor carpet. Refer to See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair/Exploded View.
3. Remove the mounting clips (A), and then remove the rear foot duct 2 (right) (1).
INSTALLATION
Install in the reverse order of removal.