Murano AWD V6-3.5L (VQ35DE) (2009)
Refer to See: Diagrams/Diagram Information and Instructions for symbols in the figure.
Removal And Installation
LOW-PRESSURE PIPE
Removal and Installation
REMOVAL
1. Use refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove the mounting bolts (A), and then disconnect the low-pressure pipe (1) from the expansion valve.
CAUTION:
Seal the connecting points of the expansion valve and pipe with caps, vinyl tape, or a similar item to prevent them from being exposed to the
atmosphere.