Murano AWD V6-3.5L (VQ35DE) (2009)
3. Remove the mounting bolts (A), and then disconnect the low-pressure flexible hose (1) from the compressor.
CAUTION:
Seal connecting points of the compressor and pipe with caps, vinyl tape, or a similar item to prevent them from being exposed to the
atmosphere.
4. Remove the mounting bolts (A), and then remove the low-pressure flexible hose (1) from the low-pressure pipe (2).
CAUTION:
Seal connecting points of pipes with caps, vinyl tape, or a similar item to prevent them from being exposed to the atmosphere.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Replace the O-ring with a new one. Apply a coat of compressor oil to the O-ring prior to installation.
-
Check for refrigerant leakage when charging refrigerant.