Murano AWD V6-3.5L (VQ35DE) (2009)
Power Steering Line/Hose: Service and Repair
Removal and Replacement
HYDRAULIC LINE
Removal and Installation
CAUTION:
-
Never apply fluid to the hose (1) and tube (2).
-
Insert hose securely until it contacts spool (A) of tube.
-
Leave clearance (L) when installing clamp (3).
-
Install eye bolt with eye joint (assembled to high pressure hose) (B) protrusion (A) facing with pump side cutout, and then tighten it to the
specified torque after tightening by hand. Refer to See: Exploded View.
-
Securely insert harness connector to pressure sensor.
-
Apply power steering fluid to around copper washer, then install eye bolt.
-
Never reuse copper washer.