Murano AWD V6-3.5L (VQ35DE) (2009)
Engine Control Module: Customer Interest
Engine Controls - MIL ON/DTC P1421/P050E Stored
Classification: EC09-017A
Reference: NTB09-066A
Date: January 19, 2011
2009 - 2010 MURANO;
MIL "ON" WITH DTC P1421/P050E STORED
The Applied Vehicles and Table A have been amended. Please discard previous versions of this bulletin.
APPLIED VEHICLES: 2009 - 2010 Murano (Z51)
IF YOU CONFIRM
For 2009 Murano, DTC P1421 (Cold Start Control) is stored in the ECM,
or
For 2010 Murano, DTC P050E (Cold Start Control) is stored in the ECM.
ACTIONS:
1. Refer to Step 2 in the Service Procedure to confirm this bulletin applies to the vehicle you are working on.
2. If this bulletin applies, reprogram the ECM.
CLAIMS INFORMATION
IMPORTANT:
The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
SERVICE PROCEDURE
1. Connect C-III to the vehicle to begin the reprogramming procedure.
CAUTION