Murano AWD V6-3.5L (VQ35DE) (2009)
Air Bag: Service and Repair
Front Side Air Bag Module
Exploded View
FRONT SIDE AIR BAG MODULE
Exploded View
Refer to See: Diagrams/Diagram Information and Instructions for symbols in the figure.
Removal And Installation
FRONT SIDE AIR BAG MODULE
Removal and Installation
REMOVAL
WARNING:
-
Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes.
-
Always work from the rear of the front side air bag module.
-
Do not use air tools or electric tools for servicing.
1. Remove the front seat. Refer to See: Body and Frame/Seats/Service and Repair/Front Seat/Removal and Installation.
2. Remove the seatback board. Refer to See: Body and Frame/Seats/Service and Repair/Front Seat/Exploded View.
3. Remove the front side air bag module fixing nuts, and/or harness connector.
4. Remove the front side air bag module.
CAUTION:
-
Always place front side air bag module with pad side facing upward.