Murano AWD V6-3.5L (VQ35DE) (2009)
Steering Angle Sensor: Service and Repair
Removal and Replacement
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable assembly. Refer to See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and
Repair/Exploded View/For USA And Canada.
2. Remove steering angle sensor from spiral cable assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
After work, make sure to adjust neutral position of steering angle sensor. Refer to See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Programming and Relearning/Adjustment Of Steering Angle Sensor Neutral
Position/Description.