Murano AWD V6-3.5L (VQ35DE) (2009)
5. Remove differential side oil seal (1) and side oil seal (transfer joint) using a flat-bladed screwdriver (A).
CAUTION:
Be careful not to scratch transaxle case and converter housing.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Drive each differential side oil seal and side oil seal (transfer joint) evenly using a commercial service tool so that differential side oil seal and side
oil seal (transfer joint) protrudes by the dimension
(C) respectively.
A : Transaxle case side
B : Converter housing side
NOTE:
Differential side oil seal and side oil seal (transfer joint) pulling direction is used as the reference.
CAUTION:
-
Never reuse differential side oil seals and side oil seal (transfer joint).
-
Apply CVT fluid to differential side oil seals and side oil seal (transfer joint).