Murano AWD V6-3.5L (VQ35DE) (2009)
/Page-843001.png)
Shifter CVT: Adjustments
CVT Position
CVT POSITION
Inspection and Adjustment
INSPECTION
1. Move selector lever to "P" position, and turn ignition switch ON (engine stop).
2. Check that selector lever can be shifted to other than "P" position when brake pedal is depressed. Also check that selector lever can be shifted
from "P" position only when brake pedal is depressed.
3. Move selector lever and check for excessive effort, sticking, noise or rattle.
4. Check that selector lever stops at each position with the feel of engagement when it is moved through all the positions. Check that the actual
position of selector lever matches the position shown by shift position indicator and manual lever on the transaxle.
5. The method of operating selector lever to individual positions correctly should be as shown.
6. When selector button is pressed in "P", "R", "N", "D" or "L" position without applying forward/backward force to selector lever, check button
operation for sticking.
7. Check that back-up lamps illuminate only when selector lever is placed in the "R" position.
8. When in "R" position, check that back-up lamps do not illuminate even when the selector lever is in the "P" position.
CAUTION:
Check the lighting without pressing shift button.
9. Check that back-up lamps do not illuminate when selector lever is pushed toward the "R" position when in the "P" or "N" position.
CAUTION:
Check the lighting without pressing shift button.
10. Check that the engine can only be started with selector lever in the "P" and "N" positions.
11. Check that transaxle is locked completely in "P" position.
ADJUSTMENT
1. Move selector lever to " P" position.
CAUTION:
Turn wheels more than 1/4 rotations and apply the park lock.
2. Loosen the control cable nut.
3. Place manual lever to "P" position.
CAUTION:
Never apply any force to manual lever.
4. Tighten the control cable nut. Refer to See: Shift Linkage/Service and Repair/Exploded View.
CAUTION:
Fix manual lever when tightening.
