Murano AWD V6-3.5L (VQ35DE) (2009)
Power Window Switch: Service and Repair
Removal And Installation
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the power window main switch finisher (2). Refer to See: Window Glass/Front Door Window Glass/Service and Repair/Exploded View
and See: Window Glass/Front Door Window Glass/Service and Repair/Removal And Installation.
2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.
CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH and RH).
INSTALLATION
Install in the reverse order of removal.
NOTE:
Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. Refer to See: Testing and
Inspection/Programming and Relearning/Additional Service When Removing Battery Negative Terminal/Special Repair Requirement