Murano FWD V6-3.5L (VQ35) (2004)
Front Door Exterior Handle: Service and Repair
FRONT DOOR LOCK
Component Structure
Removal and Installation
REMOVAL
1. Remove the front door finisher.
2. Disconnect the inside handle knob cable and lock knob cable from the back side of the front door finisher.
3. Remove the front door window and front door module assembly. Refer to Windows/Service and Repair/"FRONT DOOR GLASS AND
REGULATOR".
4. Remove door side grommet, and remove door key cylinder assembly (driver side) and outside handle escutcheon (passenger side) bolts (TORX
T30) from grommet hole.