Murano FWD V6-3.5L (VQ35) (2004)
74. Install seat assembly into vehicle.
a. Lean the entire seat assy back (so the seat back touches the rear seat) to access the under side of the seat.
b. Connect the 3 connectors at front of seat.
75. Tighten seat anchor bolts and install front
^ Torque spec: 43.1 - 54.9 Nm, (4.4 - 5.5 kg-m, 32 - 40 ft lb).
76. Reconnect battery, positive cable first.
77. Reprogram radio presets and set the clock.