Murano FWD V6-3.5L (VQ35) (2004)
![background image](/nissan/murano_fwd/v6-3.5l_(vq35)/Page-608001.png)
Cylinder Head Gasket: Service and Repair
REMOVAL
1. Remove the following components and related parts:
^
Fuel tube and fuel injector assembly.
^
Intake manifold.
^
Exhaust manifold.
^
Water inlet and thermostat assembly.
^
Water outlet and water piping.
2. Remove camshaft.
3. Remove cylinder head loosening bolts in reverse order shown in the figure.
INSPECTION AFTER REMOVAL
Outer Diameter of Cylinder Head Bolts