Murano FWD V6-3.5L (VQ35) (2004)
Hose/Line HVAC: Service and Repair
Low-Pressure Flexible Hose
Removal and Installation of Low-pressure Flexible Hose
REMOVAL
1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove cowl top cover.
3. Remove the air duct (inlet).
4. Remove mounting bolt for low-pressure flexible hose. (Compressor side)
5. Remove mounting bolt from low-pressure flexible hose.
6. Remove low-pressure flexible hose.
CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-rings for A/C piping with new one, then apply compressor oil to it when installing it.
-
When recharging refrigerant, check for leaks.