Murano FWD V6-3.5L (VQ35) (2004)
![background image](/nissan/murano_fwd/v6-3.5l_(vq35)/Page-1184002.png)
2. Check portion B of EVAP canister vent control valve for being rusted.
3. Check air passage continuity and operation delay time under the given conditions.
Make sure new O-ring is installed properly.
Operation takes less than 1 second.
If NG, replace EVAP canister vent control valve.
If OK, Go to next step.
4. Clean the air passage (Portion A to B ) of EVAP canister vent control valve using an air blower.
5. Perform step 3 again.