Murano FWD V6-3.5L (VQ35) (2004)
![background image](/nissan/murano_fwd/v6-3.5l_(vq35)/Page-1266004.png)
REQUIRED PARTS
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Campaign (CM) line claim using the claims coding table.
Disclaimer
Service Procedure
Install the fuel tank shield kit as follows.
Required TOOLS:
1 - 10 mm socket
1 - 3" Extension
1 - Socket Wrench
1 - Flat Blade Screwdriver
1 - Pair of diagonal/side cutters
1 - Torque Wrench (in-lb.)
1.
Place the vehicle on a lift.
2.
Modify and re-position the plastic clip attached to the three metal tubes as follows: