Murano FWD V6-3.5L (VQ35) (2004)
Use the illustration above for reference while performing the Service Procedure. Items # 1 and # 8 will be replaced.
CAUTION:
Do not use any lubricant when removing or installing the air ducts and resonators. Lubricant may adversely affect the ducts and resonators.
1. Disconnect the Positive Crankcase Ventilation (PCV) hose from resonator 1.
2. Loosen the clamps shown in Figure 1 (clamps at both ends of the air duct assembly).
3. Remove the air duct assembly from the vehicle and set it on a clean working surface.
4. After removing the air duct assembly, cover the openings to the electronic control throttle and airflow meter with clean cloth / rags.
CAUTION:
^ Make sure to cover the openings to the electronic control throttle and airflow meter.
^ Covering the openings will prevent debris entry.