Murano FWD V6-3.5L (VQ35) (2004)
Ignition Coil: Service and Repair
IGNITION COIL
REMOVAL
1. Remove the engine cover.
2. Disconnect the mass air flow sensor electrical connector and remove the air cleaner and air duct assembly.
3. Remove the RH windshield wiper arm and the RH front cowl top cover.
4. Remove the intake manifold collector (upper and lower), gasket, and electric throttle control actuator. The intake manifold collector (upper)
should be moved aside with water hoses connected.
5. Remove ignition coil.
INSTALLATION
1. Installation is in the reverse order of removal.