Murano FWD V6-3.5L (VQ35) (2004)
8. As the tape rolls up to the "D" ring, center and smooth the tape around the back side of the "D" ring. Press the bubbles and wrinkles out with your
fingers (see Figure 7).
9. Peel off the remaining tape backing (see Figure 8A).
10. Carefully apply the tape around the remainder of the "D" ring. Press down the edges and make sure there are no wrinkles (see Figure 8B).
11. Pull the seat belt back and forth against the tape-covered "D" ring to ensure that the tape is firmly applied (see Figure 9).
12. Remove the binder clip from the seat belt.
13. Confirm the seat belt moves smoothly and quickly through the "D" ring.