Murano FWD V6-3.5L (VQ35) (2004)
Yaw Rate Sensor: Service and Repair
G SENSOR / REMOVAL
G SENSOR
1. Remove center console.
2. Disconnect harness connector.
3. Remove installation nuts. Remove yaw rate/side/decal G-sensor.
CAUTION: Do not drop or strike the yaw rate/side/decal G-sensor, because it has little endurance to impact.
Do not use power tool etc., because Yaw rate/side/decal G sensor is weak for the impact.
INSTALLATION
Install in the revere order of removal.
CAUTION: Do not drop or strike the yaw rate/side/decal G-sensor, because it has little endurance to impact.