Murano FWD V6-3.5L (VQ35) (2004)
![background image](/nissan/murano_fwd/v6-3.5l_(vq35)/Page-1457002.png)
CAUTION: Perform when the engine is cold.
3. Remove air duct (inlet). Refer to "Removal and Installation".
4. Remove battery. Refer to "Removal and Installation".
5. Remove air cleaner case (upper and lower), resonator, mass air flow sensor and air duct assembly. Refer to "Removal and Installation".
6. Remove fuse and fusible link block from battery bracket.
7. Remove battery bracket.
8. Remove battery bracket mounting.
9. Remove air cleaner bracket. Refer to "Removal and Installation".
10. Remove control cable from transaxle assembly. Refer to "Removal and Installation".