nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Transmission Cooler, CVT|Service and Repair > < Transmission Cooler, CVT|Testing and Inspection
Page 2
background image

a. If small metal debris less than 1 mm (0.040 inch)in size or metal powder is found in the coffee filter, this is normal. If normal debris is found, the

CVT fluid cooler/radiator can be re-used and the procedure is ended.

b. If one or more pieces of debris are found that are over 1 mm in size and/or peeled clutch facing material is found in the coffee filter, the fluid

cooler is not serviceable. The radiator/fluid cooler must be replaced and the inspection procedure is ended.

CVT FLUID COOLER FINAL INSPECTION

After performing all procedures, ensure that all remaining oil is cleaned from all components.

Transmission Cooler, CVT|Service and Repair > < Transmission Cooler, CVT|Testing and Inspection