Murano FWD V6-3.5L (VQ35DE) (2006)
-
BCM is activated with low power mode.
-
CAN communication is not active.
-
When CAN communication operation is detected, it switches to CAN communication status.
-
When a state of the following switches changes, it switches to CAN communication state.
-
Key switch
-
Hazard switch
-
Door lock/unlock switch
-
Front door switch (driver side, passenger side)
-
Rear door switch (LH, RH)
-
Back door opener switch
-
Combination switch (passing, lighting switch 1ST position, front fog lamp)
-
Key fob (lock/unlock signal)
-
Key cylinder switch
-
When control performed only by BCM is required by switch, it shifts to CAN communication inactive mode.
SYSTEMS CONTROLLED BY BCM DIRECTLY
-
Power door lock system
-
Remote keyless entry system
-
Power window system(NOTE)
-
Sunroof(NOTE)
-
Power seat(NOTE)
-
Room lamp timer
-
Rear wiper and washer system
NOTE: Power supply only. No system control.
SYSTEMS CONTROLLED BY BCM AND IPDM E/R
-
Panic alarm
-
Theft warning
-
NVIS (NATS)
-
Headlamp, Battery saver control
-
Daytime light system
-
Auto light system
-
Front fog lamp
-
Parking, license plate and tail lamps
-
Front wiper and washer system
-
Rear window defogger
SYSTEMS CONTROLLED BY BCM AND COMBINATION METER
-
Warning chime
-
Turn signal and hazard warning lamps
-
Low tire pressure warning system
SYSTEMS CONTROLLED BY BCM AND INTELLIGENT KEY UNIT
-
Intelligent Key system