Murano FWD V6-3.5L (VQ35DE) (2006)
![background image](/nissan/murano_fwd/v6-3.5l_(vq35de)/Page-1400006.png)
3. Insert the piston boot piston-side lip into the piston groove.
CAUTION: Press the piston evenly and vary the pressing point to prevent cylinder inner wall from being rubbed.
4. Install sliding pins and sliding pin boots to torque member.
5. Attach the inner shim and shim cover to the inner pad and the outer shim and shim cover to the outer pad.
6. Install cylinder body. Tighten sliding pin bolt to the specified torque.