Murano FWD V6-3.5L (VQ35DE) (2006)
a. Use a scraper to remove old liquid gasket from mating surfaces.
CAUTION: Do not scratch or damage the mating surfaces when cleaning off old liquid gasket.
^
Also remove old liquid gasket from mating surface of cylinder block.
^
Remove oil liquid gasket from bolt holes and threads.
b. Install new oil pan gaskets.
^
Apply liquid gasket to new oil pan gaskets as shown in the figure. Use Genuine RTV Silicone Sealant or equivalent.
^
To install, align protrusion of oil pan gasket with notches of front timing chain case and rear oil seal retainer.
^
Install oil pan gasket with smaller arc to front timing chain case side.
c. Install new O-rings on the bottom of cylinder block and oil pump.