Murano FWD V6-3.5L (VQ35DE) (2006)
Heater Core: Service and Repair
HEATER CORE
Removal and Installation
REMOVAL
1. Remove heater & cooling unit assembly. See: Housing Assembly HVAC/Service and Repair
2. Remove air mix door motor (passenger side).
3. Remove foot duct (right).
4. Remove mounting screw, and then remove heater core cover.
5. Remove mounting screw, and then remove heater pipe support and heater pipe grommet.
6. Slide heater core (shown in the figure) to passenger side.
INSTALLATION
Installation is basically the reverse order of removal.