nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 11734 > < Diagram Information and Instructions|Page 11732
Page 2
background image

With the key inserted into the ignition switch, and the ignition switch LOCK or ACC position, when driver's door is opened, the warning chime will
sound.

-

BCM detects key inserted into the key switch, ignition switch in LOCK or ACC position, and front door switch (driver side) ON. And then
transmits buzzer output signal (ignition key warning chime) to unified meter and A/C amp. with CAN communication.

-

Unified meter and A/C amp. transmits buzzer output signal (ignition key warning chime) to combination meter with communication line.

-

When combination meter receives buzzer output signal (ignition key warning chime), it sounds the buzzer.

When Intelligent Key Is Carried With The Driver

Refer to "WARNING CHIME FUNCTION".  See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Description and
Operation/Intelligent Key System

LIGHT WARNING CHIME

With ignition switch in OFF or ACC position, driver's door is opened, and lighting switch in 1ST or 2ND position, the light warning chime will sound.

-

BCM detects ignition switch in OFF or ACC position, front door switch (driver side) ON, and lighting switch in 1ST or 2ND position. And then
transmits buzzer output signal (light warning chime) to unified meter and A/C amp. with CAN communication.

-

Unified meter and A/C amp. transmits buzzer output signal (light warning chime) to combination meter with communication line.

-

When combination meter receives buzzer output signal (light warning chime), it sounds the buzzer.

NOTE:  For further details of combination switch, refer to "Combination Switch Reading Function".  See: Body and Frame/Body Control
Systems/Body Control Module/Description and Operation

SEAT BELT WARNING CHIME

With ignition switch turned ON and driver's seat belt unfastened, seat belt warning chime will sound for approximately 6 seconds.

-

Combination meter reads a ON/OFF signal from seat belt buckle switch (driver side), and transmits seat belt buckle switch signal to unified meter

Diagram Information and Instructions|Page 11734 > < Diagram Information and Instructions|Page 11732