Murano FWD V6-3.5L (VQ35DE) (2006)
>
Engine coolant and lubricating oils at specified levels
>
Spare tire, jack, hand tools, and floor mats in designated positions
NOTE:
Refer to the appropriate Service Manual for information about any of the above checks and inspections.
4. Check the target mounts.
^ If there is any visual damage (bent, worn, cracked, etc), have the equipment repaired before performing any alignments.
^ Make sure the target mounts are properly adjusted and configured (see Figure 11).
NOTE:
The target mount example shown in Figure 11 is for Hunter "camera type" alignment machines. Follow the operation manual for your specific
equipment.