Murano FWD V6-3.5L (VQ35DE) (2006)
^ C-III PCMCIA Card Adapter is installed.
^ C-III Security Card is installed.
^ A screen print for Warranty documentation can be done from C-III during this process while still cable-connected to the vehicle.
1. Use the USB cable to connect the Vehicle Interface (VI) to the C-III computer and then connect the VI to the vehicle.
CAUTION
2. Connect the AC Adapter to the C-III computer.
CAUTION
3. Connect a battery charger to the vehicle battery:
For Conventional Vehicles
^ Set the battery charger at a low charge rate.
NOTE:
The GR-8 (Battery and Electrical Diagnostic Station) set to "Power Supply" mode is recommended.
CAUTION
For Hybrid Vehicles
^ Use the GR-8 Battery and Electrical Diagnostic Station.
^ If needed, refer to Hybrid Service TSBs for connecting the GR-8 to the Hybrid 12V battery.