Murano FWD V6-3.5L (VQ35DE) (2006)
Control Module: All Technical Service Bulletins
A/T - CVT/5 Speed Initialization Information
Classification: AT08-004A
Reference: NTB08-0645A
Date: July 11, 2008
CVT AND FWD 5 SPEED A/T INITIALIZATION INFORMATION
APPLIED VEHICLES:
2004-2008 Maxima (A34) with CVT or 5 speed A/T
2005-2006 Altima (L31) with 5 speed A/T
2007-2008 Altima Sedan (L32) with CVT
2008 Altima Coupe (CL32) with CVT
2007-2008 Sentra (B16) with CVT
2007-2008 Versa (C11) with CVT
2008 Rogue (S35) with CVT
2003-2007 Murano (Z50)
2009 Murano (Z51)
2004-2008 Quest (V42) with 5 speed A/T
SERVICE INFORMATION
When installing a TCM (Transmission Control Module), CVT or 5 Speed A/T on an applied vehicle, initialize the TCM under the following conditions:
CVT equipped vehicles:
The TCM needs to be initialized when:
^ Replacing the CVT or the Valve Body assy and not the TCM
^ Installing / swapping a TCM from another vehicle
5 Speed A/T equipped vehicles:
The TCM needs to be initialized when:
^ Replacing the Automatic Transmission and not the TCM
^ Installing / swapping a TCM from another vehicle
NOTE:
If initialization is not performed, the shift feel may be more pronounced after either of the above services.
Refer to the Service Procedure for initialization steps.
SERVICE PROCEDURE
For the initialization procedures in this bulletin:
^ Use CONSULT-II for 2006 and older vehicles.
^ Use C-III for 2007 and newer vehicles (except Quest)
^ For Quest, use CONSULT-II
CVT equipped vehicles:
The TCM needs to be initialized when:
^ Replacing the CVT or the Valve Body assy and not the TCM
^ Installing / swapping a TCM from another vehicle