Murano FWD V6-3.5L (VQ35DE) (2006)
20. The screen in Figure 9 is displayed during data transfer.
CAUTION: During data transfer:
^ DO NOT disturb the VI, DDL, or USB connections.
^ DO NOT try to start the engine or turn the ignition OFF.
^ The engine fans may turn on. This is normal.
NOTE:
^ If "Transfer To VI" reaches 100%, and "Transfer To ECU" does not start, or
^ The Error in Figure 9A displays.
a. DO NOT replace the ECM. The ECM is not damaged.
b. Check / make sure the battery voltage is above 12 V and all vehicle electrical loads are turned OFF (see step 3 and 4).
c. Select Cancel Data Transmission, then click on the "Home" icon (upper left corner of C-III screen) and re-start from the beginning (step 1).
Part 2