Murano FWD V6-3.5L (VQ35DE) (2006)
21.
Disconnect the 2 electrical connectors shown in Figure 19.
22.
Make sure the ignition knob is in the lock position and the steering wheel is locked.
CAUTION:
If the steering wheel is not locked before the lock cylinder is removed, the steering wheel lock may not work after the new lock cylinder is installed.
23.
Remove the 2 anti-theft bolts from the lock cylinder and remove the lock cylinder from the steering column.
NOTE:
A sharp punch and hammer can be used to loosen the bolts by tapping the bolt heads counterclockwise.