Murano FWD V6-3.5L (VQ35DE) (2006)
![background image](/nissan/murano_fwd/v6-3.5l_(vq35de)/Page-1247001.png)
Shift Cable: Service and Repair
CONTROL CABLE COMPONENTS
Refer to the figure for control cable removal and installation procedure.
REMOVAL
1. Remove knob cover below selector lever downward.
2. Pull lock pin out of selector lever knob.
3. Remove selector lever knob.
4. Remove A/T console finisher.
5. Remove console box assembly.
6. Disconnect control cable of control device.
7. Disconnect control device harness connector.